Remove Bathroom Mirror Clips [March 2021]

We may earn compensation through affiliate links in this story.

The process of removing the mirror clips is simple and self-explanatory. The only thing you need to do is remove the screw that holds the clip in place.

Once the screw has been removed, pull out the clip from the wall or mirror. It might take a little tugging, but eventually it should come loose. If you have trouble with any part of this process, please visit your local hardware store for additional help or contact a handyman service in your area for assistance.

Be very careful here as these clips keep the mirror in place. Without them the mirror could be loose and fall. Always work with a partner and use a professional service when possible.

Here is a quick list of things you will need to remove the clips:

Screwdriver (Phillips-head)
Flathead screwdriver (to pry up the new clips after they have been installed)
Old clips (if you are removing them with a screwdriver) Hammer or rubber mallet Level Tape measure Level (optional, but recommended) Stud finder Level (optional, but recommended) Paint brush or roller Paint and paint supplies for touch-ups Zip ties Utility knife to help remove old caulk

How Do You Remove A Bathroom Mirror With Clips?

If you remove a plastic mirror clip, you need to use a flat tip screwdriver and drill to pop off the plastic cover on the clip. Remove the screw and then you will be able to the mirror.

If you have a bathroom mirror that has metal clips, all you have to do is lift the mirror out of the clips and remove it.

How Do You Remove Mirror Screws?

How Do You Use Mirror Clips?

When you are hanging a heavier mirror on the wall, you use mirror clips that have wall anchors in them so that you do not have your mirror fall down because it is too heavy.

What Are Mirror Screws?

Mirror screws are zinc plated screws that are resistant to rusting and getting wearing down that you put in the wall to affix a mirror to.

How Do You Screw Into A Mirror?

When you need to drill into a mirror, use a carbide tip specially made for glass or tile and use the drill at a very low speed.

More Articles About Remove Bathroom Mirror Clips

A few articles we think you will be interested in