We may earn compensation through affiliate links in this story.
28×34 inch plywood sheet
2 pieces 32-inch board pieces
18×30 inch mirror
6 pieces lamp sockets with plug-in cords
Primer the plywood sheets. allow to dry
Paint the color of your choosing.
Determine where you want the mirror on your table and make those measurements.
Position the lamp sockets where you want them Three on each side.
In the middle drill a 1/4 inch hole.
Hold the plywood against where you want the mirror. Trace this on the sheet.
Insert the cords through holes then screw the sockets to plywood sheets
Apply adhesive to the back of the mirror and press in place on the plywood
Attach the electrical strip using the mounting screws
Drill three 1/16 inch holes through each wood board.Screw them to wall using the 3 inch screws
Drill four holes through wood toward wall boards and screw using the 2 inch screws
Connect the plugs to the electrical strip
Attach the bulbs in sockets
and turn on the lights to your mirror.
Last Updated on